: (866) 668 - 3163
Battery tester/desulfator Model OBD-24 activates when charging your batteries from an alternator, solar array, generator, or other DC power source. The SAE Quick connector input allows for easy use of additional BatteryMINDer or other charger / maintainer devices that utilize the SAE quick connect system. The built in battery tester indicators show the battery condition as Poor, Fair, or Good. It also indicates when a charge is detected, the unit is desulphating, or a battery fault is detected. Patented full-time high frequency sweep pulse desulfation is designed to reverse and eliminate battery sulfation, the #1 cause of early battery failure.
1 Year 100% Money Back Guarantee, 5 Year “No Hassle” Warranty
The OBD-24 can be used on any type of lead acid battery including but not limited to: Flooded (filler cap / maintenance-free / VRLA / SLA), gel, AGM (Optima / Odyssey / etc), starter, deep cycle and hybrid.
|Availability Note:||Backordered: ETA July|
|Output Voltage (V):||No|
|Output Current (A):||No|
|Dimensions (LxWxH - inches):||5.7 x 2.25 x 0.5|
It sounds like you want to prevent / remove the debilitating effects of sulfate in your batteries and would be best served with an on-board desulfator.
The size of your battery bank may be best served by using 1 of 2 methods. A 36-48V High Powered Industrial Desulfator (BLS-36/48-Multi-F) made by Battery Life Saver or by breaking your system down into multiple sub-series and use the 12V or 24V units.
Example a 48V system utilizing four 12 volt batteries could use four 12V Power Pulses or two 24V Power Pulses or one 48V unit.