Charge Master CM16A Charger Desulfator
Selectable for 2/8/16 amps and between wet, AGM, gel and Calcium type batteries.
Product Information
Product Features
- Battery thermal run away protection
- Internal thermal overload protection
- Ideal for winter battery maintaining
- Protected for: short circuit; reverse polarity; and overload
- Selectable battery type: WET, GEL, AGM, Calcium Battery rejuvenation (desulfation) function
- Plug-N-Play connectors
- Soft start, gentle ramp-up
- Constant current rate during bulk charge
- Float pulse charging prolongs battery life
Product Specifications
| Model | CM16A |
| Dimensions | 6.5 x 3.4 x 2.6" |
| Weight | 1.7 lb |
| Output Banks | 1 |
| Input Voltage | 120 VAC |
| Input Frequency | 60 Hz |
| Output Voltage - Charging | 14.6 VDC |
| Output Voltage - Float | 13.5 VDC |
| Maximum Current | 2/8/16 Amps Selectable |
| Operating Temp. Range | 32-120 °F |
The Schauer CM16A is the most flexible charger available! You can use it on small motorcycle batteries and large deep cycle marine batteries. It can be used as a smart microprocessor controlled charger or as a smart maintainer. The CM16A can be left on your batteries indefinitely; it will never over charge your batteries! This charger is selectable by battery type and current used. The CM16A is lightweight and comes with the SAE quick disconnect connectors. Ring, lighter adapter and 25ft extensions can be purchased separately from the accessory section of this website. The desulfating pulse mode will protect and maintain your batteries for years to come.
Compare with the Battery Minder and Battery Tender Plus. The CM16A is the better choice when it comes to charging, maintaining and desulfating your batteries!
Estimate Shipping Rate - USA zipcodes only. Place in cart to see shipping rate for other countries.
Courier: UPS
To the lower 48 states!








