Skip to Main Content »

Security Seals

Welcome to Impact Battery!

MotoBatt MBCLB Charger
Move your mouse over image or click to enlarge

MotoBatt Little Boy 1.0 Ah Motorcycle Battery Charger and Maintainer MBCLB

Quick Overview

6 Volt or 12 volt "Self-Sensing" 9 Step Fully Automatic Charger. Includes alligator clamp + eyelet leads.
  • Availability

    In Stock

  • Product Brand

    MotoBatt

  • Model Number

    MBCLB

  • Voltage (VDC)

    6 and 12

  • Max DC Current (A)

    1.0

  • Warranty

    5 Year

$35.95
ADD TO CART
  • 1.0 Ah output current charge rate with Motobatt Little Boy.
  • 13.2 to 14.4 volt automatic variable charge rate.
  • Soft start feature charges batteries with charge state as low as 2 volts
  • Auto detects 12V or 6V
  • 3 LED operational status indicator lights.
  • Bad Battery test indicator. Reverse polarity protection.
  • Spark proof Includes both alligator clamp style and remote connector style leads.
  • Optional 25' remote connector leads available on request
  • Maintains all lead acid batteries.
  • 5 Year Warranty with this motorcycle battery charger.

Motobatt's clever Microprocessor reads the correct voltage of the battery connected, the 9 Phase process monitors the battery resistance 100's of times per second during charging mode.

Qualification Stage Checks the battery is over 2V for safety reasons, then transitions to "Rescue" Phase where an arsenal of 5 different recovery modes can be utilised to revive heavily Sulphated or deeply discharged batteries. Generally at this stage unusually high voltage is seen early in the charge cycle, once the rescue phase is done the battery is ready for...

Soft Start Phase When the charger detects a low initial state of charge, voltage and current are delivered at a specific rate to assist the battery recovery before entering Pulse charging mode.

Pulse Phase Provides a high frequency pulse charge to help the newly recovering battery to accept charge as it enters recondition mode.

Recondition Phase Continues to work the battery at a slightly higher voltage and amperage to re-activate the battery plates for improved depth of charge. Now that the battery has been eased back to lifeā€¦

Bulk Charge Phase Can begin giving constant current to the battery up to about 80% of its capacity.

Absorption Phase Begins with constant voltage being supplied while current is reduced. This occurs according to the batteries ability to accept charge up to 100%.

Check Phase Is now activated to monitor the batteries ability to hold the charge properly, if not it will cycle back through the entire process for 24 hours or more until it determines the battery cannot be recovered. For revived batteries it then enters...

Maintenance Phase Where the battery can stay indefinitely connected to the charger. As the battery drops voltage while unused, the unit will activate when needed to ensure a full state of readiness.

Keeping your batteries properly maintained will dramatically Extend working Life.

Product Specs
Availability Note: In Stock
Brand: MotoBatt
Model: MBCLB
Chemistry: Lead Acid
Input Frequency (Hz): 60
Voltage (VDC): 6 and 12
Input Voltage (VAC): 120
Output Voltage - Charging (V): 7.2 / 14.4
Max AC Current (A): No
Output Voltage - Float (V): 6.6 / 13.2
Output Banks: 1
Max DC Current (A): 1.0
Ripple (%): No
Operating Temp. Range (oC): No
Warranty: 5 Year
Dimensions (LxWxH - metric): No
Weight (lb): 1
Dimensions (LxWxH - inches): No
FAQs
 

FAQs About This Product

Ask a Question

  • Will this charger/maintainer work with the MotoBatt MBTX24U battery?
    Yes.
    Rate This Answer:

  • Does this battery charger perform desulfation? I want to be able to use if for both of my bikes, one with a Lead acid battery and the other with a Shorai Lithium that support normal chargers as long as it does not perform desulfation.
    This charger does not have a frequency pulse for desulfation. It is designed for lead acid batteries. The Noco Genius chargers (i.e. G1100) have both a lead acid mode and lithium mode.
    Rate This Answer:

Product's Review