12 Volt 90 Amp Iota Power Converter/Charger

The DLS-90 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging. Using state-of-the-art, switch-mode technology , IOTA Power Converter/Battery Chargers are engineered with the user and variable environmental conditions in mind. Extra care has been given to insure many years of service-free operation, even when subjected to extremely harsh conditions. Batteries are charged quickly and efficiently without over-charging and pumps, motors, and fans operate perfectly for prolonged life. Exceptionally clean DC output insures pumps, motors, fans, and lights work perfectly. This means longer life for any connected load; virtually no AC ripple to cause static or premature failure of radio or television equipment. Quickly and efficiently charges batteries from the full rated output of the IOTA battery charger. The battery charger then maintains the batteries, only putting into the battery what is required by load or self-discharge, cutting back to milliamps as the battery requires. Protection against low and transient AC line voltage as well as spikes coming from the AC power source or from improperly adjusted generators, a major cause of converter/power supply failure. Meets F.C.C. criteria, minimizing radio and television equipment interference especially on the lower frequency bands Can be used with or without a battery When used as a converter/power supply, the IOTA power converter will only supply what is required by the load. When not in use it is essentially off, reducing electricity usage. Lower operating temperature half that of some switch mode electronic models, even in its subcompact size. This means substantially longer life and safer operation. Tight line-load regulation ensures that the output voltage holds steady from no load to full load. This keeps pumps, motors, and lights working at the correct voltage even during brown-out situations. Proportional Fan Circuitry provides an extra measure of protection. During times of heavy load demands, the automatic circuitry will activate the fan before thermal stress can occur on any internal components. External fuses protect the IOTA unit against improper wiring and can be quickly and easily replaced. Multiple units can be operated in series or parallel to increase voltage or amperage.