MotoBatt MPLXKTM16-P Lithium Battery for KTM 79011153000, HUSQVARNA C22S

This MPLXKTM16-P LiFePO4 replaces the original equipment (OE) KTM lithium battery 79011153000. The 3 primary bikes include: KTM 250 SX F , KTM 350 SX-F and the KTM 450 SX F. Interestingly, the battery also fits several Husqvarna motorcycles. The 3 primary HUSQVARNA motorcycle include the FC 250, 350 and 450.

Equivalent part numbers produced include: Samsung C22 and Battery Controller BCLFP01. Motobatt's MPLX version produces over 35% more crank than the OE or competitors.

MPLXKTM16-P Features

• Motobatt Lithium batteries are around 3 times lighter than lead acid batteries
• Designed to produce higher cranking performance for competition environments
• Strong Starting Current, Reliable repeated start opportunities over a wide variety of conditions
• Very Low “self-discharge” while in storage
• Fast Recharge time, 6 minutes for up to 90% charge

Cell Balancing Circuit (CBC)

This is a key feature of Motobatt Lithium batteries over competition. Dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.

Each Motobatt Lithium battery contains a unique CBC which controls the charge and discharge of the cells at all times, especially when currents can be unreliable when in actual use on the machine. Many competitors require you to buy their specific charger at a high cost because the CBC is in the charger, not the battery itself. This is inferior cell control since the only time the cells are properly controlled and balanced is when connected to a wall socket.

Special Features

• Contains CBC board and 70CCA over standard
• Note competitor batteries or standard P series Lithium Batteries may not recover from being drawn down under 8V. This is the leading cause of nuisance warranty for Lithium batteries.

Motobatt Pro Lithium batteries are a high performance racing battery designed to produce high cranking currents for short burst periods. Lithium starting batteries generally lack Amp Hour capacity and are not suitable for applications where high power loads are placed on the battery. Stereo systems, Grip and clothing heaters, winches, light bars etc. all draw excess loads and lithium starting batteries are not designed to cope with these loads. Always thoroughly assess the power requirements of your machine with all loads on with an experienced technician before making a decision to use a Lithium battery.

Motorcycle Fitment Details: