PDCFB Motobatt 12V 2A Lithium Charger

$74.95
In stock
SKU
PDCFB_1
Suitable for LiFePO4 lithium batteries and all Lead-Acid based batteries

Suitable for LiFePO4, AGM, GEL, and Standard Flooded Lead Acid Types. "Smart" microprocessor selects correct chemistry when battery is connected. Plug and Play, no thinking, PDCFB does it for you! Latest technology optimized for MotoBatt Batteries. This is the perfect charger for all your powersport battery needs!

Now comes with BMW Canbus "cigarette lighter" connector

Motobatt's clever Microprocessor reads the correct voltage of the battery connected, the 9 Phase process monitors the battery resistance 100's of times per second during charging mode.

Qualification Stage Checks the battery is over 2V for safety reasons, then transitions to "Rescue" Phase where an arsenal of 5 different recovery modes can be utilised to revive heavily Sulphated or deeply discharged batteries. Generally at this stage unusually high voltage is seen early in the charge cycle, once the rescue phase is done the battery is ready for...

Soft Start Phase When the charger detects a low initial state of charge, voltage and current are delivered at a specific rate to assist the battery recovery before entering Pulse charging mode.

Pulse Phase Provides a high frequency pulse charge to help the newly recovering battery to accept charge as it enters recondition mode.

Recondition Phase Continues to work the battery at a slightly higher voltage and amperage to re-activate the battery plates for improved depth of charge. Now that the battery has been eased back to life…

Bulk Charge Phase Can begin giving constant current to the battery up to about 80% of its capacity.

Absorption Phase Begins with constant voltage being supplied while current is reduced. This occurs according to the batteries ability to accept charge up to 100%.

Check Phase Is now activated to monitor the batteries ability to hold the charge properly, if not it will cycle back through the entire process for 24 hours or more until it determines the battery cannot be recovered. For revived batteries it then enters...

Maintenance Phase Where the battery can stay indefinitely connected to the charger. As the battery drops voltage while unused, the unit will activate when needed to ensure a full state of readiness.

Keeping your batteries properly maintained will dramatically Extend working Life.

More Information
Availability Note Accepting Backorders
Brand MotoBatt
Model MBCFB
Chemistry Lithium-iron
Input Frequency (Hz) 60
Voltage (VDC) 12
Input Voltage (VAC) 120
Output Voltage - Charging (V) 14.7
Output Voltage - Float (V) 13.4
Output Banks 1
Max DC Current (A) 2.0
Warranty 5 Year
Weight (lb) 1.5
Write Your Own Review
You're reviewing:PDCFB Motobatt 12V 2A Lithium Charger
Your Rating
We found other products you might like!
Copyright © 2013-present Impact Battery. All rights reserved.