SCP2440 Select-A-Charge 24V 40A Portable Charger by Quick Charge

The SCP2440 has one touch programming that allows these chargers to charge deep cycle wet cell, starting, gel, and AGM batteries with precision. Also programmable is the length of the gassing /absorption cycle. The 2 digit LED displays percent of charge to complete cycle, and battery voltage. A tricolor LED also follows charge progress. Can be temperature compensated. DC current limiting, and polarity protected. Turns on with as little as 2 volts.

Use the Select-A-Charge Portable chargers with Golf Cars, Floor Scrubbers, Forklifts, RV's, Electric Vehicles, Automotive, and Industrial Applications

All Select-A-Charge chargers are built to order in Oklahoma by Quick Charge Corp and come standard with an SB50 or SB175 or clamps. When ordering, please specify in the comments section which type of connector you desire otherwise the most appropriate SB50/175 connector will be installed. Please call in your order if you require an SB350 connector. The SB350 will cost $20 more. You can also request that your SCP2440 Quick Charger be made to accept 240V AC input instead of the standard 120V AC for an additional $22 (will be notated by XU appended to the item SKU).

• The peak charge voltage on the wet cell deep cycle setting is 2.55 volts per cell.
• The peak on the AGM setting is 2.45 volts per cell.
• The peak on the gel/starting battery setting is 2.3 volts per cell.
• Uses 11 amp AC
• Target battery size 350-550 Amp hour.